Fitel S199M12
Model S199M12
is a FITEL 12-Ribbon Mass Fusion Splicer. Use it for quick ribbon-type fiber
splicing in outside plant and long-haul applications. Portable, compact unit
features an insertable battery. Its large 5" low-reflection LCD monitor can be
seen clearly, even under strong sunlight. Because fibers are inspected by two CCD cameras simultaneously, the entire splicing process averages a very fast 30
seconds. Before carrying out real splicing, the embedded diagnosis function will
help the user check the machine's status. The fiber position adjustment button
can help fine tune the fiber position in the v-groove. A white LED lamp can help
set up fiber in dark environments.
Remaining
battery life can be checked on the screen. This wind-proof splicer can withstand
wind up to 33 mph without being affected. With the help of a fan-embedded
heater, fiber reinforcement time can be shortened. Heater clamps can absorb and
adjust fiber tension automatically. The arc check function can help the machine
adjust the arc discharge conditions automatically based on the environmental
condition. This is important for low-loss splicing. S199M12 splicer can store
data for up to a maximum of 250 splices
The operation
procedure begins with setup fiber, press "set" and feed fibers. Then inspect,
splice and loss estimation. The final steps are loss display, remove spliced
fiber, heat shrink protection and end.
Specifications
include: fiber type (SMF: 250-m, 900-m single fiber and 2F, 4F, 6F, 8F, 10F, 12F
ribbon fiber; MMF: 250-m, 900-m single fiber and 2F, 4F, 8F, 12F ribbon fiber;
DSF: 250-m, 900-m single fiber and 2F, 4F, 8F, 12F ribbon fiber; NZDSF: 250-m,
900-m single fiber and 4F, 6F, 8F, 10F, 12F ribbon fiber), cladding diameter
(125 m), coating diameter (250-m, 900-m single fiber; 280-m to 400-m ribbon
fiber), average splice loss (SMF: 0.03 dB, MMF: 0.03 db, DSF: 0.07 dB, NZDSF:
0.05-0.09 dB brand dependent), average splice time (30 seconds splicing, 90
seconds heating), cleave length (10 mm), data memory (250 splices), applicable
protection sleeves (40 mm, 60 mm) and battery life (30 splices with heat shrink
protection).
