|
SPECIFICATIONS |
|
Model |
FSM-50R12: Mass fusion splicer up to 12-fiber
FSM-50R8: Mass fusion splicer up to 8-fiber |
|
Applicable fibers |
SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU -T
G.653), NZDS (ITU-T G.655) |
|
Fiber Count |
FSM-50R12: Single, 2, 4, 5, 6, 8, 10 and 12
FSM-50R8: Single, 2, 4, 5, 6 and 8 |
|
Fiber cleaved length |
10mm |
|
Actual average splice loss |
0.05dB with SM, 0.02dB with MM, 0.08dB with DS, and 0.08dB with NZDS.
Measured by cut-back method relevant to ITU-T and IEC
standards. |
|
Splicing time |
Typical 20seconds |
|
Return loss |
>>60dB |
|
Splicing modes |
40 user programmable modes and up to 60 modes for
reference (factory predetermined setting). |
|
Splice loss estimate |
Available |
|
Storage of splice result |
FSM50R12: The last 400 results to be stored
in the internal memory.FSM50R8: The last 500
results to be stored in the internal memory. |
|
Fiber display |
X / Y, or both X and Y simultaneously. |
|
Magnification |
FSM-50R12: 35x FSM-50R8: 49x |
|
Viewing method |
Two CMOS cameras and 5.6inch color LCD monitor. |
|
Operating condition |
0 to 3,660m above sea level, 0 to 95%RH
and -10 to 50 ¡æ respectively. |
|
Mechanical proof test |
2N |
|
Tube heater |
Built-in tube heater with 10 heating modes
and up to 20 modes for reference. |
|
Tube heating time |
Typical 40seconds with FP-04(T), 45seconds
with FP-05 protection sleeves. |
|
Applicable protection sleeve length |
60mm and 40mm |
|
No.of splice/heating with battery |
Typical 70 cycles with BTR-06(S) / Typical 140
cycles with BTR-06(L). |
|
Power supply |
Auto voltage selection from 100 to 240V AC or 10 to
15V DC with ADC-11, 13.2V DC with BTR-06(S)/(L). |
|
Terminals |
USB 1.1 (USB-B type) for PC communication.
Video terminal RCA video jack / NTSC. |
|
Wind protection |
Max. wind velocity of 15m/s. |
|
Dimensions |
150W x 150D x 150H (mm) |
|
Weight |
2.2 kg (2.7kg including AC adapter ADC-11) |
|
Operation languages |
15
type of languages |
