Digital Fusion Splicer
FEATURES
Digital fusion splicer with
automatic focus function
Advanced automatic core alignment(PAS)and fully automatic operation
Both X and Y axis display, or display X and Y axis alone, auto check quality
of cleaved end-face
Small bulk and light weight with optional function
9seconds splice time and 30 seconds heat time
5.6inch color LCD screen with clear digital image display
Large multiple&visible fiber core
USB port&VGA interface
Concave weatherproof cover & Max.wind velocity of 15m/s
SPECIFICATIONS
|
Applicable fibers |
SM(ITU-T G.652)MM ITU-T G.651DS ITU-T G.653 NZDS ITU-T G.655 |
|
Fiber Count |
Single |
|
Cladding diameter |
80 to 150μm |
|
Coating Diameter |
100 to 1000μm |
|
Fiber cleaved length |
8 to 16mm with coating diameter of 250μm or less.16mm with coating
diameter of 250 to 1000μm.Optional Set-plate for 8 to 16mm with coating
diameter of 250 to 1000μmis available |
|
Actual average splice loss |
0.02dB with SM,0.01dB with MM,0.04dB with DS.0.04 dB with NZDS Measured
by cut-bak method relevant to ITU-T and IEC standards |
|
Splicing time |
9Sec. |
|
Return loss |
>60dB |
|
Splicing mode |
40 modes |
|
Splice loss estimate |
Available |
|
Storage of splice result |
The last 4000 result to be stored in the internal memory |
|
Fiber display |
x/Y.or both X and Y simultaneously;200/400 magnification times |
|
Magnification |
280x
for single X or Y view;or 140x for X and Y view |
|
Viewing method |
Two CMOS cameras and 5.6 inch color LCD monitor |
|
Operating condition |
0 to 5000m above sea level.0 to95%RH and -10 to 50℃ respectively |
|
